No results were found for the filter!
MEDI-FIL-A-GEHR PEEK® is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test...
Content 1 Kilogramm
€890.00 *
The semi-crystalline polyetheretherketone offers outstanding mechanical, thermal and chemical resistance. Thanks to its well-balanced property profile, PEEK is one of the most capable high-performance thermoplastics available. FEATURES:...
From €141.00 *
FIL-A-GEHR PPA is a particularly stiff and hard material. The material is particularly suited for 3D printing. Unlike carbon fibre filled materials, the print nozzles do not wear. Material distortion is minimal in 3D printing. FEATURES:...
Content 1 Kilogramm
€64.50 *
Polyphenylensulfone is an amorphous material, with improved impact and hydrolysis resistance compared to PSU and PEI. The extremely high notch impact strength remains also after a heat aging. FEATURES: High strength and rigidity Very...
Content 1 Kilogramm
€218.00 *
Compared to other polyamides, FIL-A-GEHR PA 12 has the lowest moisture absorption.The very low tendency to warping combined with very good layer adhesion and low processing temperature makes PA 12 an ideal material for 3D printing....
Content 1 Kilogramm
€72.90 *
FIL-A-GEHR PC/ABS® combines the properties of two exceptional FDM thermoplastics: the high Impact strength and heat deflection temperature of PC with the high toughness at low temperatures and the good processability of ABS. The surface...
From €29.25 *
FIL-A-GEHR PLA® is made by NatureWorks and consists of high-quality IngeoTM biopolymer. It stands out for its great dimensional stability, its high Level of stiffness as well as its high elastic modulus. Longterm tests have shown that...
From €27.00 *
FIL-A-GEHR ABS is a high-quality thermoplastic polymer with excellent mechanical properties. Aftertreatment or surface treatment can easily be applied to components made of FIL-A-GEHR ABS. The components are specifically suitable for the...
From €27.00 *
LEXAN EXL AMHI240F filament is a high impact polycarbonate product available in black and white colors. It provides high impact strength and improved ductility over standard polycarbonate at room temperature and extreme low temperatures.
Content 1 Kilogramm
€100.00 *
ULTEM AM9085F filament is a high performance polyetherimide blend product manufactured from ULTEM 9085 resin. It is available in black and natural (unpigmented) colors. It provides high heat resistance and mechanical strength, is UL94...
Content 1 Kilogramm
€135.00 *
ULTEM AM1010F filament is a polyetherimide product for 3D printing applications manufactured from ULTEM 1010 resin. The filament provides high heat resistance and mechanical strength, is UL94 V-0 compliant at 1.5 mm and 5VA compliant at...
Content 1 Kilogramm
€110.00 *
AMS31F is SABIC’s breakaway support filament for use with ULTEM™ AM9085F filament. The material maintains rigidity during printing and provides exceptional pliability during post processing to help enable easier removal of structural...
Content 1 Kilogramm
€135.00 *
Viewed