Top seller
FIL-A-GEHR ABS FIL-A-GEHR ABS
From €19.50 *
ULTEM™ 9085 FILAMENT (PEI) ULTEM™ 9085 FILAMENT (PEI)
Content 1 Kilogramm
€135.00 *
SABIC ULTEM™ AM1010F (PEI) SABIC ULTEM™ AM1010F (PEI)
Content 1 Kilogramm
€110.00 *
FIL-A-GEHR PPSU FIL-A-GEHR PPSU
Content 1 Kilogramm
€183.22 *
FIL-A-GEHR PLA FIL-A-GEHR PLA
Content 1 Kilogramm
From €18.00 *
FIL-A-GEHR PA 12 FIL-A-GEHR PA 12
Content 1 Kilogramm
€61.25 *
Close filters
 
from to
1 From 2
No results were found for the filter!
NEW
FIL-A-GEHR PC FIL-A-GEHR PC
FIL -A- GEHR PC ® is a polycarbonate filament with high heat resistance and high impact strength. The polycarbonate has been optimized for the 3D printing process. FEATURES OF FILAMENTS MADE BY GEHR » Highest precision in diameter and...
€32.50 *
NEW
ML9085 SUPPORT for ULTEM™ FILAMENT ML9085 SUPPORT for ULTEM™ FILAMENT
ML9085 SUPPORT for ULTEM ™ FILAMENT is a breakaway support filament for use with ULTEM™ filaments. FEATURES OF FILAMENTS MADE BY GEHR » Highest precision in diameter and roundness » Filaments made of high-quality raw materials »...
Content 1 Kilogramm
€135.00 *
MEDI-FIL-A-GEHR PPSU MG MEDI-FIL-A-GEHR PPSU MG
MEDI-FIL-A-GEHR PPSU MG is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test...
From €175.00 *
MEDI-FIL-A-GEHR PET MG MEDI-FIL-A-GEHR PET MG
MEDI- FIL -A- GEHR PET MG ® is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test...
€98.00 *
FIL-A-GEHR PA12 CF15 FIL-A-GEHR PA12 CF15
FIL-A-GEHR PA 12-CF15 is a 15 percent carbon fiber reinforced filament that achieves very high mechanical strength with low water absorption. Furthermore, the filament is characterized by very high rigidity and impact strength. This...
€70.23 *
FIL-A-GEHR VXL-EX Detergent FIL-A-GEHR VXL-EX Detergent
FIL-A-GEHR VXL-EX Detergent is an environmentally friendly, non-caustic detergent specifically designed to dissolve FIL-A-GEHR VXL. FIL-A-GEHR VXL-EX is very economical, only as much is needed as VXL support material was used. The...
Content 1 Liter
€21.00 *
FIL-A-GEHR VXL 130 Support Filament FIL-A-GEHR VXL 130 Support Filament
FIL-A-GEHR VXL 130 Soluble support material for professional printing The soluble support material FIL-A-GEHR® VXL 130 is easy to print, is less sensitive to humidity and, unlike other support materials, does not decompose in the nozzle....
Content 1 Stück
€180.00 *
FIL-A-GEHR VXL 90 Support Filament FIL-A-GEHR VXL 90 Support Filament
FIL-A-GEHR VXL 90 Soluble support material for professional printing The soluble support material FIL-A-GEHR VXL 90 can be printed effortlessly, is less sensitive to humidity and, unlike other support materials, does not decompose in the...
€100.00 *
MEDI-FIL-A-GEHR PEEK MG MEDI-FIL-A-GEHR PEEK MG
MEDI-FIL-A-GEHR PEEK® is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test...
Content 1 Kilogramm
From €350.00 *
FIL-A-GEHR PEEK FIL-A-GEHR PEEK
The semi-crystalline polyetheretherketone offers outstanding mechanical, thermal and chemical resistance. Thanks to its well-balanced property profile, PEEK is one of the most capable high-performance thermoplastics available. FEATURES:...
From €110.00 *
FIL-A-GEHR PPSU FIL-A-GEHR PPSU
Polyphenylensulfone is an amorphous material, with improved impact and hydrolysis resistance compared to PSU and PEI. The extremely high notch impact strength remains also after a heat aging. FEATURES: High strength and rigidity Very...
Content 1 Kilogramm
€183.22 *
FIL-A-GEHR PA 12 FIL-A-GEHR PA 12
Compared to other polyamides, FIL-A-GEHR PA 12 has the lowest moisture absorption.The very low tendency to warping combined with very good layer adhesion and low processing temperature makes PA 12 an ideal material for 3D printing....
Content 1 Kilogramm
€61.25 *
1 From 2
Viewed
Contact us
Mail us
Newsletter
Sites
You can reach us

Tel: +49 621 87 89 - 0
Fax: +49 621 87 89 – 200

GEHR GmbH
Casterfeldstr. 172
68219 Mannheim
Germany

E-Mail

You’re interested in our materials or you have a question about a particular product?

Please send us an e-mail:

3D@gehr.de

or use our contact form.

We will get in touch with you as soon as possible.

GEHR Newsletter

Stay informed about new products and current topics. Simply subscribe to our newsletter and stay up to date!

Sign up now

Facilities

Our facilities and sales offices you find here.